Direct chiral resolution of tartaric acid by ion-pair capillary electrophoresis using an aqueous background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane as a chiral counterion

Chiral resolution of native DL-tartaric acid was achieved by ion-pair capillary electrophoresis (CE) using an aqueous-ethanol background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane (R-DACH) as a chiral counterion. Factors affecting chiral resolution and migration time of tartaric acid were studied. By increasing the viscosity of the background electrolyte and the ion-pair formation, using organic solvents with a lower relative dielectric constant, resulted in a longer migration time. The optimum conditions for both high resolution and short migration time of tartaric acid were found to be a mixture of 65% v/v ethanol and 35% v/v aqueous solution containing 30 mM R-DACH and 75 mM phosphoric acid (pH 5.1) with an applied voltage of -30 kV at 25 degrees C, using direct detection at 200 nm. By using this system, the resolution (Rs) of racemic tartaric acid was approximately 1. The electrophoretic patterns of tartaric and malic acids suggest that two carboxyl groups and two hydroxyl groups of tartaric acid are associated with the enantioseparation of tartaric acid by the proposed CE method.     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.     

Effect of intramolecular pi-pi and CH-pi interactions between ligands on structure, electrochemical and spectroscopic properties of fac-[Re(bpy)(CO)3(PR3)]+(bpy = 2,2'-bipyridine; PR3= trialkyl or triarylphosphines)

Intramolecular pi-pi and CH-pi interactions between the bpy and PR3 ligands of fac-[Re(bpy)(CO)3(PR3)]+ affect their structure, and electrochemical and spectroscopic properties. Intramolecular CH-pi interaction was observed between the alkyl groups on the phosphine ligand (R =nBu, Et) and the bpy ligand, and intramolecular pi-pi and CH-pi interactions were both observed between the aryl group(s) on the phosphorus ligand (R =p-MeOPh, p-MePh, Ph, p-FPh, OPh) and the bpy ligand, while no such interactions were found in the trialkylphosphite complexes (R = OiPr, OEt, OMe). The intramolecular interactions distort the pyridine rings of the bpy ligand as long as 3.7 x 10(-2)A in crystals. Molecular orbital calculations of the bpy ligand suggest that this distortion decreases the energy gap between its pi and pi* orbitals. An absorption band attributed to the pi-pi*(bpy) transition of the distorted rhenium complexes, measured in a KBr pellet, was red-shifted by 1-5 nm compared to the complexes without the distorted bpy ligand. Even in solution, similar red shifts of the pi-pi*(bpy) absorption were observed. The redox potential E1/2(bpy/bpy*-) of the complexes with the trialkylphosphine and triarylphosphine ligand are shifted positively by 110-120 mV and 60-80 mV respectively, compared with those derived from the electron-attracting property of the phosphorus ligand. In contrast with these properties, three nu(CO) IR bands, which are sensitive to the electron density on the central rhenium because of pi-back bonding, were shifted to higher energy, and a Re(I/II)-based oxidation wave was observed at a more positive potential according to the electron-attracting property of the phosphorus ligand.     

Aromaticity of planar boron clusters confirmed

Low-energy boron clusters are characterized by two-dimensional geometry. Aromaticity of these planar boron clusters was established in terms of topological resonance energy (TRE). All planar boron clusters were found to be highly aromatic with large positive TREs even if they have 4n pi-electrons. Aromaticity must therefore be the origin of unusual planar or quasi-planar geometry. Thus, the aromaticity concept is as useful in boron chemistry as it is in general organic chemistry. It is evident that the Hückel 4n + 2 rule of aromaticity should not be applied to such polycyclic pi-systems. Some of the boron clusters are in the triplet electronic state to attain higher aromaticity. Multivalency and electron deficiency of boron atoms are responsible for lowering the energies of low-lying pi molecular orbitals and then for enhancing aromaticity. For polycyclic pi-systems, paratropicity does not always indicate antiaromaticity.     

Selective determination of microbial cells by graphite electrode modified with adsorbed 4,4′-bipyridine

The concentrations of microbial cells in suspensions can be measured with a graphite electrode modifed with adsorbed 4,4′-bipyridine, by using cyclic volummetry or differential pulse volummetry. The relationship between the peak current and the cell concentration for Saccharomyces cerevisiae is linear over the range 0.03 × 10⁸—2.0 × 10⁸ cells ml^?1. Yeast, gram-positive bacteria and gram-negative bacteria gave different peak potentials, which may be useful for classification purposes. Electron transfer between the microbial cells and the 4,4′-bipyridine-modified electrode is mediated by coenzyme A in the cell wall.     

A novel synthesis of 1H-pyrrole-2,3,4,5-tetracarboxylates

A novel and convenient synthesis of 1H -pyrrole-2,3,4,5-tetracarboxylates is described. Photocyclization of 1,1′-bis(methoxycarbonyl)divinylamine with acetylenedicarboxylates gave 7-azabicyclo[2.2.1]hept-2-ene-1,2,3,4-tetracarboxylates 2a-i , which on melting split ethylene off to yield 1H-pyrrole-2,3,4,5-tetracarboxylates 3a-i quantitatively.     

Direct catalytic aldol-type reactions using RCH2CN

[reaction: see text] A copper fluoride-catalyzed cyanomethylation that can be applied to a wide range of ketones and aldehydes was developed using TMSCH(2)CN as a nucleophile. The reaction was extended to a conceptually more advanced copper alkoxide-catalyzed direct addition of alkylnitriles to aldehydes, which can act as a surrogate direct catalytic aldol reaction of esters. These reactions can be applied to the first catalytic enantioselective cyanomethylation of ketones and direct catalytic enantioselective cyanomethylation of aldehydes.     

Subsecond separation of cellular flavin coenzymes by microchip capillary electrophoresis with laser-induced fluorescence detection

In this article, it was demonstrated that a subsecond separation of cellular metabolites such as riboflavin (RF), flavin mononucleotide (FMN), and flavin-adenine dinucleotide (FAD) was achieved using microchip capillary electrophoresis with laser-induced fluorescence detection. The influences of crucial parameters that governed analysis time (e.g., channel length and electric field for separation) and separation resolution (e.g., sample size) were investigated, both in theoretical aspects and experimental practice. Quantitative analyses were performed that exhibited linear dynamic range of two orders of magnitude, with calculated detection limits of 34, 201, and 127 nM for RF, FAD, and FMN, respectively. To test the validity of the method, it was successfully applied to characterize several recombinant flavin-binding domains in a human neuronal nitric oxide synthase.     

Heat capacity measurements of MnxFe3−xO4

Heat capacities of Mn_xFe_3?xO₄ with the composition x = 1.0, 1.5, and 2.0 were measured from 200 to 740 K. λ-type heat capacity anomalies due to the ferri-paramagnetic transition were observed for all the compositions. The transition temperatures were 577, 471, and 385 K for the composition x = 1.0, 1.5 and 2.0, respectively, which are in good agreement with the results of magnetic measurements. The difference in heat capacities between the different samples was small except for the temperature range of the transition. The magnetic contribution to the observed heat capacity was obtained by assuming that the heat capacity can be expressed by the sum of the lattice heat capacity C_v (l), the dilation contribution C(d), and the magnetic contribution C(m). Entropy changes due to the transition were obtained from C(m) as 55.5, 50.7 and 49.2 J K^?1 mole^?1 for the composition x = 1.0, 1.5, and 2.0, respectively. The entropy changes were also calculated by assuming the randomization of unpaired electron spins on each ion, but they were from 6 to 10 J K^?1 mole^?1 smaller than the observed ones. The difference between the experimental and the calculated values is roughly explained by taking into account the cation exchange reaction between the tetrahedral and the octahedral sites in the spinel structure.